Bagni Electric & Generator · Generac Dealer #11137819 · Over 30 years in the generator industry Call (339) 970-8802 · Mon–Fri 7:30 AM–4:00 PM
Bagni Electric & Generator logo

Generac® Home Standby Generators · Billerica, MA

When the power goes out,
your house doesn’t.

A Generac whole-house standby generator starts on its own in about 10 seconds — heat, hot water, fridge, well pump, Wi-Fi — and runs for as long as the outage lasts. Bagni Electric & Generator sizes it right, installs it with our own team, and keeps it serviced.

~10 secfrom outage to full power, automatically
30+ yrsin the generator industry
0%Synchrony financing on the entire project
$385/yrsemi-annual service plan, tax included
Generac home standby generator installed on its pad beside a house at dusk, the home’s windows lit

About Bagni Electric & Generator

Protect your home from the risks of sudden power outages with a generator from Generac — the #1 name in home standby power — installed and serviced by Bagni Electric & Generator, Generac Dealer #11137819 in Billerica, MA.

When the power fails, these systems start automatically and carry your home until the utility restores service. A permanent standby installation is not a do-it-yourself project: Bagni’s own team sizes the unit with a real load calculation, handles the permits and inspections, and starts it under load before we leave. And with over 30 years in the generator industry, we stay your dealer for the life of the unit — the $385/year semi-annual service plan, warranty work handled locally, and a real local number when you need us.

See What Customers Are Saying

Completed Bagni Generac installation: generator on its pad with the automatic transfer switch beside the meter
A finished Bagni install — generator on its pad, Generac automatic transfer switch mounted beside the meter.
83 Alexander RdBillerica, MA 01821
(339) 970-8802Call or text · Mon–Fri 7:30 AM–4:00 PM
Free ConsultationGet an estimate →

How automatic standby actually works

No extension cords, no gas cans, no 2 a.m. trip to the garage in a nor’easter. Watch Generac’s own explainer, then see the four steps below.

01

The power drops

The automatic transfer switch senses the outage the instant utility power fails — day, night, home or away.

02

It starts itself

The Generac fires up in about 10 seconds on your natural gas line or propane tank. No fuel to store or pour.

03

Your house runs

Heat stays on, food stays cold, sump and well pumps keep working. Managed loads rotate so nothing overloads.

04

It hands back & shuts down

When the utility returns, the switch hands the house back. The generator cools down, shuts off, and exercises itself weekly so it is always ready.

What size generator do you actually need?

Tap everything you want running during an outage. Heat pump + electric auxiliary heat and a well pump are exactly the loads that change the answer — this tool accounts for them, then we confirm with a real load calculation at your free consultation.

Items marked load-managed don’t all have to run at the same instant. Generac load-management modules pause a big load for a few minutes so a smaller — less expensive — generator can carry the house, with heat always first in line. That is often the difference between a 24 kW and a much bigger unit.

The Generac line, matched to the house

We don’t sell one size. The right unit depends on your heating system, your panel, and what you refuse to live without during a February outage.

Generac Guardian Next Gen standby generator installed beside a home

Most homes · Air-cooled

Guardian Next Gen 14–26 kW

  • Generac’s current air-cooled line — every Guardian Bagni installs is a Next Gen
  • Whole-house coverage with a 200A automatic transfer switch
  • Runs on natural gas or propane
  • Load management for AC, ranges, dryers, and EV chargers
  • Generac’s latest design — quieter, easier to service, with Mobile Link™ remote monitoring available
  • Built for New England winters with cold-weather accessories
Generac Protector liquid-cooled standby generator

Large homes · Liquid-cooled

Protector 30 kW+

  • Liquid-cooled power for large homes and heavy electric heat loads
  • Handles multiple transfer switches and outbuildings
  • Automotive-style engine, built for long, multi-day runs
  • The right answer when air-cooled sizing runs out of headroom

Generator Installation

Installation, handled start to finish

What’s involved in installing a home backup generator?

One local team handles the whole job — electrical, placement, permits, and coordination with your gas or propane work. Here is how a Bagni install runs, in five steps.

01

Free consultation

At home or virtual. We look at your panel, heating system, and where the unit will sit.

02

Sizing & load calc

Calculated from your actual equipment — not a square-footage guess.

03

Permits, pad & fuel

Permits and inspections handled. Natural gas or propane coordinated.

04

Install day

Generator set on its pad, transfer switch wired by Bagni’s own install team.

05

Startup & walkthrough

Started under load, outage walkthrough, and your service plan set up.

See the Full Installation Process

Semi-Annual Service Plan

$385 / year

Tax included. Two visits a year, so the unit that sits quietly for months is ready the one week it matters.

  • 6-month inspection — fluids, battery, exercise cycle, overall check
  • 12-month major service — full preventive maintenance visit
  • Warranty service by the dealer who installed it

What Each Visit Covers

0% Financing

0% on the whole project

Through Synchrony, qualified buyers can finance the entire project — generator, installation, the works — at 0%.

  • Applies to the full project, not just the equipment
  • Choose the generator your house needs
  • Terms walked through with your quote — no surprises

How 0% Financing Works

A home with its lights on at night while the surrounding street is dark during a power outage

Be the house with the lights on.

2024 was the worst outage year on record in the U.S. — 11.0 average hours per customer. Massachusetts averaged 3.9 outage hours per year, with 66% of those hours on major-event days. Winter storms are when a standby generator earns its keep.

Towns we serve

Based at 83 Alexander Rd in Billerica and installing across the Merrimack Valley and MetroWest suburbs. Open your town’s page for local outage context and the free consultation offer.

Guides buyers actually read

Quick answers

We heat with a heat pump and electric auxiliary heat. Will a generator keep us warm?

Yes, when it is sized for it. Auxiliary heat is a very large load, so we calculate from your heat pump tonnage and aux heat package. Many homes are carried by a 24 kW with load management prioritizing heat; others honestly need larger. See the full FAQ →

Natural gas or propane?

Natural gas at the street is usually simplest — unlimited run time. On propane, tank size is about run time. Note: a Generac 24 kW delivers the full 24 kW on propane; 22.5 kW is its natural gas rating.

What does maintenance cost?

Bagni’s semi-annual service plan is $385 per year, tax included — a 6-month inspection and a 12-month major service.

Read All FAQs   Read Reviews & Leave One

Home · Installation

Generac installation, done by our own team

Bagni Electric & Generator installs Generac home standby generators across Greater Billerica — sized with a real load calculation, permitted, and started up by the same local team that will service it for years.

Completed Generac installation with generator on its pad and transfer switch on the wall
A finished install: generator on its pad, Generac automatic transfer switch mounted beside the meter.

What’s included in every install

  • Free in-home consultation and written quote — or a virtual consultation from photos
  • Load calculation & sizing from your actual equipment, including heat pump + auxiliary heat
  • Generac generator sized to your home (Guardian Next Gen or Protector)
  • Automatic transfer switch — the brain that starts, transfers, and shuts down the system
  • Generator pad — a level, code-compliant base set for the unit
  • Battery — installed and tested at startup
  • Electrical permits & inspections — handled by Bagni
  • Fuel coordination — natural gas connection or propane tank sizing with your provider
  • Cold-weather accessories where called for — battery warmer and oil warmer for reliable below-freezing starts
  • Startup under load & walkthrough — we show you exactly what happens in an outage
  • Generac extended warranty promotions — current offers explained with your quote

Whole-house surge protection is recommended on every install and confirmed on your proposal — included or listed as an option, never ambiguous.

The 5-step process

  1. Free consultation — at home or virtualWe look at your panel, your heating system, and where the unit will sit. Virtual works too — send photos through the intake form and get a real quote.
  2. Sizing & load calculationFrom your actual equipment — heat pump tonnage, auxiliary heat, water heater, ranges, well pump — not a guess. We will tell you if a smaller unit with load management does the job for less.
  3. Permits, pad & fuelElectrical permits and inspections are handled. We coordinate natural gas or propane, including what tank size your run-time needs.
  4. Install daySee the walkthrough below. Bagni’s own install team — not a subcontractor handed a box.
  5. Startup & walkthroughWe start it under load, walk you through an outage, register the unit, and set up your $385/year service plan.

Install day, walked through

Most whole-house installs follow the same rhythm. Your crew lead confirms the plan on arrival and keeps you posted at each step.

Morning

Set & place

The pad is set and leveled, the generator is placed with code clearances, and the transfer switch location is confirmed at your panel.

Midday

Wire & connect

The automatic transfer switch is wired, the battery is installed, and fuel work is coordinated — natural gas or propane.

Afternoon

Test under load

Power to the house is briefly transferred to the generator to prove the system carries your real loads — heat included.

Before we leave

Walkthrough

You see the weekly exercise cycle, the status lights, what to check, and who to call. Inspections are scheduled and warranty paperwork is explained.

Start With a Free Consultation

Home · Service & Maintenance

Generator service that keeps the promise

A standby generator is insurance that has to start. Bagni’s semi-annual service plan is $385 per year, tax included — two visits a year from the Generac dealer who knows your unit.

One plan. Two visits. $385 a year.

Bagni Electric & Generator’s service agreement is $385 per year, tax included. It is a semi-annual plan: a 6-month inspection and a 12-month major service, every year your plan is active.

6-Month Inspection

The mid-cycle check that catches small problems before outage season.

  • Fluid levels and condition checked
  • Battery health and connections checked
  • Exercise cycle verified — the unit runs its weekly self-test correctly
  • Overall inspection: enclosure, air flow, leaks, alarms, and status history
  • Anything found is explained plainly, with next steps before it becomes a no-start

12-Month Major Service

The full annual preventive maintenance visit.

  • Complete major preventive maintenance service for your Generac unit
  • Wear items and service items addressed per Generac’s maintenance schedule for your model
  • Full run test and system check, including transfer operation
  • Service record kept with your dealer — useful for warranty and resale
  • Priority scheduling for plan customers when storms threaten
$385/yrTotal price, tax included. No separate “plus tax” surprise.
2 visitsEvery year: one inspection, one major service.
LocalServiced by Bagni — Generac Dealer #11137819 in Billerica.

Why maintenance is not optional

A standby generator sits idle most of the year, then must start instantly in the worst weather of the year. Batteries age, fluids degrade, and a missed exercise fault can sit silent for months. Semi-annual service is how a generator that “should” start becomes a generator that does start. It also keeps your maintenance record clean for Generac warranty purposes.

Already own a Generac that Bagni didn’t install? Ask us about enrolling it in the plan — we service Generac units across our service area.

Enroll or Ask a Question

Home · Repair

Generac repair & warranty work

Generator won’t start, showing a fault, or failed its exercise? Bagni Electric & Generator provides Generac service and warranty work for homeowners in Greater Billerica — whether we installed your unit or not.

Common calls we handle

  • Unit failed to start or failed its weekly exercise
  • Fault codes, alarms, and shutdowns
  • Battery, charger, and cold-weather starting problems
  • Transfer switch issues — power not transferring, or not transferring back
  • Rough running, fluid leaks, and unusual noise
  • Mobile Link / monitoring connectivity questions

Warranty work, handled locally

As a Generac dealer (Dealer #11137819), Bagni handles Generac warranty service for units we installed — and can advise on warranty status and next steps for units installed by others.

  • Have your model and serial number ready when you call — it speeds everything up
  • Ask about current Generac extended warranty promotions if your coverage is ending
  • After repair, ask about the $385/year plan so the next fault is caught at a scheduled visit, not during a storm

Owner resources from Generac

Owner’s manual: find the manual for your generator (or any Generac equipment) through Generac’s online product support — search by model or serial number at generac.com/service-support/product-support-lookup.

Warranty questions: Generac answers warranty questions directly at 888-GENERAC (888-436-3722) — or call Bagni first and we will check your coverage locally.

Registration: to keep your warranty coverage accurate, make sure your Generac equipment is registered at register.generac.com. Registration also serves as proof of purchase in the event of an insurance loss such as fire, flood, or theft. If Bagni installed your unit, we register it at startup — ask us if you are not sure yours is on file.

What to do right now if your generator failed

1. Check the controller. Note any fault message or code word-for-word — it tells our team where to start. 2. Don’t keep restarting it. Repeated failed starts can drain the battery and hide the original fault. 3. Call Bagni at (339) 970-8802 during business hours, Mon–Fri 7:30 AM–4:00 PM, and tell us the fault, the model if you know it, and whether the unit is under a service plan.

Call for Service — (339) 970-8802

Home · Financing

0% financing on the entire project

Through Synchrony, qualified buyers can finance the whole Generac project at 0% — not just the generator box. Here is what that means, in plain language.

The plain version: Bagni Electric & Generator offers 0% financing through Synchrony on the entire generator project for qualified buyers. “Entire project” means the generator, the automatic transfer switch, the pad and battery, installation labor, and the other work in your written proposal — financed as one project, not a pile of separate charges.

Why it matters

  • Size the house, not the monthly budget. If your home honestly needs a 24 kW with load management, 0% financing lets you install the right system now instead of undersizing and regretting it in February.
  • One decision, one quote. Your free consultation produces one written price. The financing conversation happens on that number, with terms explained before you sign.
  • No interest cost on the project. At 0%, the amount you finance is the amount you pay over the term, subject to the Synchrony terms for qualified buyers.

How it works

1. Book a free in-home or virtual consultation. 2. Get your sized recommendation and written quote. 3. Ask for the 0% Synchrony picture on that exact quote — we walk the terms through with you. 4. Decide on your timeline. There is no pressure to decide on the spot.

Questions to ask any dealer about financing

  • Does the rate apply to the entire project or only the equipment?
  • What term does the 0% rate cover, and what happens after it?
  • Are there fees or conditions I should see in writing?

We will answer all three on your quote, in writing. Financing is subject to credit approval and Synchrony’s terms.

Get My Free Quote With Financing

Home · Reviews

Rated 5 stars — help us keep it that way

Bagni Electric & Generator works to earn a 5-star review on every install and service visit. If we’ve worked on your home, the most helpful thing you can do is leave a Google review — it takes two minutes and it is how neighbors find us.

★★★★★

What 5-star service means here

★★★★★

Sized honestly

We show the load math — including when a smaller unit with load management does the job for less. No upsizing for the sake of the ticket.

★★★★★

Installed by our own team

Permits handled, pad set, transfer switch wired, startup under load, and a walkthrough before we leave. One local team, start to finish.

★★★★★

Serviced for years

The $385/year semi-annual plan, warranty work handled by your installing dealer, and a real local number: (339) 970-8802.

Had a great install or service visit?

Tap the button below and Google opens the review form for Bagni Electric & Generator at 83 Alexander Rd, Billerica. Mention your town and what we installed or serviced — those details help the next homeowner more than anything.

Write a Google Review

Something not go right? Call us first at (339) 970-8802 — we would rather fix it than read about it.

Home · FAQ

Generator questions, answered straight

The real questions from real Bagni consultations — sizing, fuel, permits, solar, cold weather, and costs. Bagni Electric & Generator, 83 Alexander Rd, Billerica, MA · (339) 970-8802.

Home · Contact / Get a Quote

Get a quote — free consultation

An in-home consultation, or a virtual one from photos. You get a real load calculation, a sized recommendation, and a written quote — including the 0% Synchrony financing picture — with no pressure to decide on the spot.

Call or text — fastest

Bagni Electric & Generator
83 Alexander Rd, Billerica, MA 01821
Mon–Fri 7:30 AM–4:00 PM
Generac Dealer #11137819

Call (339) 970-8802 Text (339) 970-8802 Message Us on Facebook

Start with the intake form

Prefer to start in writing — or want a virtual / remote quote? Use the Bagni intake form. It includes a “Photos for your remote quote” section: panel photos, where the unit could sit, gas meter or propane setup, and the appliances you most want powered.

  • Takes a few minutes, no account needed
  • Photo uploads are optional but make a remote quote far more accurate
  • We reply with consultation times — arrival windows are quoted as one hour, centered on your scheduled time

Open the Intake Form

Form: Bagni Electric & Generator — Generator Information Form (Jotform).

What happens after you reach out

1. We confirm a time for your in-home consultation, or review your photos for a virtual one. 2. You get a load calculation, a sized Generac recommendation, and a written quote. 3. We walk through the 0% financing picture and any Generac extended warranty promotion with that quote. You decide on your timeline.

Home · Towns We Serve

Generac installation, town by town

Bagni Electric & Generator is based at 83 Alexander Rd, Billerica, MA 01821. Every town below has its own page — local outage context, what sizing looks like there, and the free consultation offer. Call (339) 970-8802 from any town.

Don’t see your town?

We work across the Merrimack Valley and MetroWest suburbs beyond this first wave of town pages. Call (339) 970-8802 and ask — if we can’t help, we will say so plainly.

Home · Guide

What size generator do I need?

Sizing and load management, explained the way we explain it at a kitchen table in Billerica — with the heat pump math most dealers skip.

Short answer: most 3–4 bedroom Massachusetts homes need a 14 kW to 26 kW air-cooled Generac Guardian Next Gen. The size is set by your largest loads — heating first — not by square footage alone.

Start with heat — it decides everything

In New England, the sizing question is a heating question. A gas or oil furnace with a blower is a modest electrical load. A heat pump is larger, and a heat pump’s electric auxiliary heat — the heat strips that take over in deep cold — is often the single biggest load in the house, commonly around 10 kW on its own. Add the heat pump itself and you can be at 16 kW before the fridge, lights, or well pump get a vote.

That is why Bagni calculates from your actual equipment: heat pump tonnage, the size of your auxiliary heat package, water heater type, ranges, dryer, EV charger, well and sump pumps. Two identical-looking houses can honestly need different generators.

Load management: the honest way to size down

Generac load-management modules pause big, flexible loads — a range, an EV charger, a water heater, a hot tub — for the few minutes your heating system needs full capacity, then restore them automatically. Heat always wins. Managed well, load management is often the difference between a 24 kW and a much larger, more expensive unit — with no real-world sacrifice during an outage.

The well pump rule

If your home is on a well, the well pump is a must-keep load: no well pump means no water at all during an outage. It is modest in watts but has a hard startup surge, and it belongs in every load calculation for well homes — including most homes in Carlisle-style rural pockets and parts of Tewksbury and Chelmsford.

Fuel changes the rating

Generator ratings depend on fuel. A Generac 24 kW unit delivers the full 24 kW on propane; its natural gas rating is 22.5 kW. If your home is on natural gas and your load calculation lands near the top of a size, that difference matters — and it is part of why the calculation is done on your fuel, not a brochure number.

When to step up to liquid-cooled

Very large homes, multiple heat pumps with full electric auxiliary heat, multiple transfer switches, or outbuildings can outgrow the air-cooled line (which tops out at 26 kW). That is Protector territory — 30 kW and up, liquid-cooled. A good dealer tells you that plainly instead of squeezing an air-cooled unit past its honest limit.

The free way to know for sure

Use the sizing tool on our home page for a starting estimate, then book a free in-home consultation. Bagni confirms the size with a true load calculation and prices both ways where it makes sense: the smaller unit with load management, and the larger unit that carries everything at once.

Book My Free Sizing Visit  Next: What Does It Cost? →

Home · Guide

What does a whole-house Generac cost in Massachusetts?

No two quotes are the same — and any dealer who prices your house without seeing it is guessing. Here are the factors that actually move the number, and how to compare quotes fairly.

The honest framing: a whole-house Generac project is priced as a complete installed system — generator, automatic transfer switch, pad, battery, electrical work, permits, fuel connection, and startup — not as a bare equipment price. Bagni quotes the whole project in writing after a free consultation, so the number you approve is the number for the finished, running system.

The factors that move your price

  • Generator size and line. A 14 kW Guardian Next Gen costs less than a 26 kW; a liquid-cooled Protector costs more than any air-cooled unit. Correct sizing — including load management — is the biggest legitimate lever on price.
  • Heating system. Heat pump + electric auxiliary heat homes need more capacity (or smarter management) than gas-heat homes. This is the #1 reason two similar houses get different quotes.
  • Fuel. A natural gas connection is usually straightforward where gas is at the house. Propane can add tank work — commonly a 250–500 gallon tank for extended run time — coordinated with your propane provider.
  • Panel and transfer switch work. Panel condition, distance between the meter/panel and the generator location, and whether load-management modules are part of the design.
  • Site work. Pad placement, trenching or line runs, and access.
  • Options that protect the investment. Whole-house surge protection, cold-weather accessories (battery and oil warmers), Mobile Link monitoring, and Generac extended warranty promotions.
  • Permits and inspections. Included in a Bagni install — handled, not handed to you.

Costs after install day

Budget for ownership, not just installation: Bagni’s semi-annual service plan is $385 per year, tax included (6-month inspection + 12-month major service). Fuel use during an outage depends on load and duration. That is the full picture — there is no required subscription to keep a Generac running.

How 0% financing changes the picture

Through Synchrony, qualified buyers can finance the entire project at 0%. That turns one installed price into a predictable monthly amount with no interest cost over the term — and it means the decision can be about the right size for the house, not the size the savings account forces this month. Terms are walked through on your written quote.

How to compare two quotes fairly

  • Same size and fuel rating? (Remember: 24 kW on propane = 22.5 kW on natural gas.)
  • Is the transfer switch, pad, and battery included — or “extra”?
  • Are permits, inspections, and startup under load included?
  • Is surge protection and cold-weather equipment in, out, or silently missing?
  • Who services it, and what does the service plan cost per year?

Get a Quote You Can Compare  ← Back to the Sizing Guide

Find out what your house needs — free.

Bagni Electric & Generator · 83 Alexander Rd, Billerica, MA 01821 · Mon–Fri 7:30 AM–4:00 PM · Generac Dealer #11137819 · Over 30 years in the generator industry.

Call (339) 970-8802 Text Us Start With the Intake Form

Free in-home or virtual consultation. Written quote with sizing, 0% Synchrony financing picture, and current Generac extended warranty promotions.

Call (339) 970-8802Get an Estimate